1 micron food and beverage application polypropylene PP pleated filter cartridge
♦ Part one: Frotec Filter Cartridge Description
1.Brief introduction and Technical Specification
Pleated cartridge filters contain no surfactants or binders that can break down, leach out, or permit the typical problems of channeling and media migration. Maximum effective open surface areas allow for high flow rates at reduced pressure drop, as well as high dirt holding capacity, long service life, large throughputs, and lower operating costs. These pleated cartridge filters may be used as either pre-filters or as final filters for bulk and point-of-use filtration. They are most appropriate for use when high efficiency filtration and economy are crucial.
Material of Construction
• Filter Media: Polypropylene
• Support : Polypropylene
• Core / Cage / End adaptor: Polypropylene
• Sealing Technology: Thermal bonding
• Seal Material:Silicone,EDPM,Buna,Viton, E-FKM
• Filtration Area: 0.5m2each 10" length
Dimensions of the PP pleated cartridge filter:
• Outside diameter: 2.7” (69mm)
• Length: 5", 10", 20", 30", 40"
Ordering Guide
Model PPF | Micron Rating | End Adaptor | Seal | Length |
PPF | 010: 0.1μm 022: 0.22μm 045: 0.45μm …….. 10: 1μm 30: 3μm ........ 500: 50μm ........ | Code 0 - DOE Double open end 1 - 226/Fin 2 - 222/Fin 3 - 222/Flat closed 4 - 226/Flat closed 5 - 215/Flat closed 6 O-ring insert/Flat closed | E-EPDM N-Buna S-Silicone V-Viton E-FKM | 5" 10" 20" 30" 40" |
items | Details | |
Filter fineness | 1μm,5μm,10μm,20μm,30μm, 50μm,75μm,100μm | |
Filter length | 10",20",30" | |
Core diameter | φ69mm | |
Filter inside | φ28mm | |
maximum resistance temperature | polypropylene | 60°C |
degreasing cotton | 120°C | |
maximum pressure | 1.0MPa@25°C | |
Positive pressure differential | 0.4MPa@25°C | |
negative pressure differential | 0.1MPa@25°C | |
Connection Type | Surface pressure | |
material attached | polypropylene | |
Dimension | |||
PP-10 | PP-20 | PP-10B | PP-20B |
H: 10inch | H: 20inch | H: 10inch | H: 20inch |
ID:28mm | ID:28mm | ID:28mm | ID:28mm |
Properties | ||||||
Filtration Accuracy |
Start Pressure(kPa) |
Filter out particles |
Air flow rate (m3/h) |
DOP(0.3μm) | ||
A,B,C | P | A,B,C | P | |||
1 | 10.5 | 18.2 | 0.5 | 11.9 | 8.33 | 99.9999 |
2 | 8.4 | 13.3 | 1 | 13.6 | 9.01 | 99.9999 |
5 | 5.6 | 5.6 | 2.5 | 22.1 | 22.1 | 99.99 |
7 | 3.5 | 3.5 | 5 | 34 | 34 | 99.99 |
10 | 2.1 | 2.1 | 7.5 | 54.4 | 54.4 | 99.2 |
15 | 1.05 | 1.05 | 10 | 83.3 | 83.3 | 88 |
20 | 0.7 | 0.7 | 12 | 158.1 | 158.1 | 84.8 |
40 | 0.35 | 0.35 | 20 | 408 | 408 | 48.3 |
70 | <0.35 | <0.35 | 45 | 964 | 964 | 34 |
90 | <0.35 | <0.35 | 60 | 1428 | 1428 | 25 |
2. Product Show
3. Application
• Pre-filtration for RO system
• Solvents, selected acids & lyes, chemical industry.
• Semiconductor, Electronic industry ultrapure water system
• Food and beverage
• Oil and Gas industry.
• Pharmaceutics
• Paints, coatings and plating solutions
♦ Part two: Frotec Filter Cartridge Packaging
♦ Part three: Frotec Serivce
1. Our Service
♦Welcome to your inquiry,you are promised to get our quotation withing 24 hours
♦We are pleased to send you a sample on you confirm
♦We promise that we will implement your order on time
♦You are promised to get the best quality at the best price with the best service
2.FAQ
a.OEM service available for filter cartridge?
Yes, OEM service is available, but the Frotec brand price better than OEM
b.Payment Term
We can accept L/C, T/T, Western Union, MoneyGram and paypal
c.Certicification
We had passed ISO9001
d.Shipping
If your order is not big enough , Door to Door Service is the best choice via UPS,FEDEX,DHL,EMS.
For big quantity, by air or by sea through your forwarder is one Normal Way , we also can provide cost-effective forwarder for your reference.
e. Lead time
The normal lead time is 7-15 days, which depends on your quantity.
♦ Part four: Frotec Advantage Products
|
|
|
|
|
|
Call Us
